Aeon Zenith 64 Stainless Steel Heated Towel Warmer Baby Flat 560mm High x 380mm Wide
Product Features
- 560mm High X 380mm Wide
- Output Delta T 50k = 147 watts (502 BTU's)
- do not corrode or flake
- can be used on open or closed systems
- are pressure tested with air to 10 bars under water
- Radiator Depth of 40mm
- Has a brushed stainless steel finish
- Valves are not supplied
If you need more than one valve or element for multiple order amounts, you will find these products under Towel Rail Radiator Valves & Elements
Aeon Collection Zenith 100% Stainless Steel Heated Towel Warmer
Aeon Zenith Towel Rail Installation Instructions PDF 
| ZENITH TOWEL RADIATOR STAINLESS STEEL |
|
|
|
DIMENSIONS |
PIPE
CENTRES |
# OF
TUBES |
HEAT OUTPUTS
DELTA T : 50C |
|
|
PRODUCT |
HEIGHT (mm) |
LENGTH (mm) |
DEPTH (mm) |
(mm) |
|
BTU |
WATTS |
|
|
ZENITH 64 |
560 |
380 |
|
340 |
9 |
502 |
147 |
|
|
ZENITH 105 |
1000 |
480 |
|
440 |
15 |
1,018 |
298 |
|
These rails are of highest quality finish and attention to little details demand a attention in admiration.
Gentle and generous are unusual qualities to blow you away but after a few moments in its presence you'll soon discover why. Perfection has reached new heights because of its delicate delivery of warmth to the body and to the soul.
Quality and performance are not compromised in this new range, in which all the products are manufactured out of 100% stainless steel - ensuring that they will keep their good looks.
Every radiator is supplied with brackets, blanking plugs, air vents, fixing screws.
Each model can be used in direct or indirect systems. All models carry a 20 year manufacturers warranty.
When you order a rail and element together the correct sized element is supplied.
Please add an element to your shopping basket to make the rail dual fuel, which makes the rail work in the summer as well, so you can dry your towels all year around.
From our point of view, this is a must have when buying the rail for bathroom use.
Please note the elements are supplied with a T-Piece to the finish of the rail.
Another good product from www.tradeplumbing.co.uk
Model selection reckoner
To identify the model with the most suitable heat output for your bathroom (linear measurements in feet)
Step 1: Multiply room length x room width x room height = room volume (cu ft)
Step 2: Multiply room volume as calculated in Step 1 by 5. This figure gives a rule of thumb guide to the heat output (in BTU's) required for the bathroom. |
