Aeon Zephyr Stainless Steel Designer Vertical Radiator 2000mm (H) X 240mm (W)
Product Features
- Pipe centres: 200mm
- 2000mm High X 240mm Wide X 30mm Deep
- Output Delta T 50k = 776 watts (2646 BTU's)
- do not corrode or flake
- can be used on open or closed systems
- Distance from radiator to wall: 60-75mm
- air pressure tested with air to 10 bars under water
- brushed stainless steel finish
- Valves are not supplied
- 5 tubes
Product Characteristics
- These rails are of highest quality finish and attention to little details demand a attention in admiration.
- Gentle and generous are unusual qualities to blow you away but after a few moments in its presence you'll soon discover why. Perfection has reached new heights because of its delicate delivery of warmth to the body and to the soul.
- Quality and performance are not compromised in this new range, in which all the products are manufactured out of 100% stainless steel - ensuring that they will keep their good looks.
- Every radiator is supplied with brackets, blanking plugs, air vents, fixing screws.
- Each model can be used in direct or indirect systems.
- All models carry a 20 year manufacturers warranty.
Model selection reckoner
To identify the model with the most suitable heat output for your bathroom (linear measurements in feet)
Step 1: Multiply room length x room width x room height = room volume (cu ft)
Step 2: Multiply room volume as calculated in Step 1 by 5. This figure gives a rule of thumb guide to the heat output (in BTU's) required for the bathroom. |
