Biasi 24KW Riva Compact Combination Non Condensing Boiler
Need help viewing this PDF document? Follow the link to our Help With PDFs Section
Small in size, big on performance
• Automatic boiler bypass • Anti-scale control system • Frost protection system • Electronic ignition system • Ultra-compact dimensions • 24 hour electronic programmer • No compartment ventilation required • LPG Kits available
This is a none condensing boiler please go to our shop for condensing boilers
Please not: All boilers need to be fitted by registered CORGI fitters and will have to be approved by them. Please do not purchase any items without consulting your plumber before.
Go with the flow ...
Horizontal Flue Kit & Digital Time Clock is included In price
Technical Data
Central Hearing
Heat Input
26.6kW (90,754Btu's)
Minimum Heat Output 9.3kW (31,730Btu’s)
Temperature
Seating Range ºC 38/85
Expansion Vessel Capacity 6 Litres
Maximum Working Pressure 3.00 bar
System Cold Fill Pressure 1.3 bar
Normal Operating Pressure Range 1.3
to 2.7bar
Available Pump Pressure (at 1000
litres/hr) 0.3 bar m.w.c 3.0
Domestic Hot Water
Heat Input 26.6kW
(90,754Btu's)
Temperature
Seating Range ºC 35/55
Normal
Working
Pressure
Range 0.3
to 5.0 bar
Minimum
Working
Pressure
Range 0.3
bar
Maximum
Pressure 10.00 Bar
Minimum
Flow Rate 2.5 l/min
Other Data
Voltage/Frequency 230/50 V/Hz
Power 150W
Height
703mm
Width
400mm
Depth
325mm
Weight
39kg
C.H.
Inlet & Outlet Connections 22mm / ¾"
Gas Inlet
Connection 22mm / ¾“
D.H.W
Inlet & Outlet Connection 15mm / ½"
Standard
Flue Pipe ? (Nominal Length 750mm) 60/100mm
Maximum
Horizontal Length of Flue Pipe 2.0m
Minimum
Horizontal Length of Flue Pipe 0.5m
Efficiency
SEDBUK
Rating D
Building
Regulations – Part L compliant
Clearance Requirements
Top &
Bottom 200mm
Left Hand
Side 25mm
Right Hand
Side 50mm
Minimum
Front Clearance requirements in Operation 50mm
Minimum
Front Clearance requirements for Servicing and Maintenance 600mm
Why Choose
a Biasi Combi Boiler?
Ultra-compact design Elegant Italian styling Beautiful, gloss white casing Designed to be wall mounted thus
saving you valuable space Hot water supplied at mains pressure Wide choice of flueing options
including vertical and multi-directional, room-sealed balanced flues that
expel flue gases to the outside via integral fan units Electronic ignition system Automatic boiler bypass Frost Protection System New, advanced 24 hour Electronic
Programmer All Biasi combi boilers are
manufactured to comply with all EU Safety Standards
Ideal for the larger
home and supplying that extra Domestic Hot Water requirement.
So easy to
install and maintain
No tank or cylinder Minimal pipe work Substantial savings on materials Quick & easy installation Easy access to all main components Servicing time and bills greatly
reduced Conversion Kits available for liquid
petroleum gas users Pipe work to the boiler can be completed prior to the
boiler installation with the aid of a pre pipe fixing jig. It is also
possible to hide the pipe work behind the boiler through the use of a
concealed pipe work jig. Both jigs are available as additional
accessories.
Simple
Controls Save you Even More
All Riva Compact combi boilers have electronic
ignition, without a pilot flame - saving on gas bills. They also come with a
fitted 24 hour electronic programmer as standard so you can control your
heating and hot water needs precisely according to the demands of your
household.
What is a
Combi boiler
A
combi (combination) boiler heats water directly from the cold mains as you use
it. There's no hot water cylinder, no water tank in the loft, and no pipes to
worry about in Winter.Combi boilers supply hot water at mains pressure,
assuring you of a powerful shower without a seperate pump. Bathe when you like
too - there's no need to wait for the water to heat up!
Important
Instructions
Please note: All boilers need to be fitted by registered CORGI fitters and will have
to be approved by them.Please do not purchase any items without consulting your
CORGI REG plumber before purchasing.Once opened, a restocking charge would have
to be charged due to the fact they are not resalable once opened. They will
have to be re-tested, and re-sealed by the manufactures, hence the need of a
restocking charge on all boilers.We are not permitted to re-sell second hand
boilers due to CORGI GAS SAFETY.
Please click on the Specification link below this is the manufactures brochure with all details you may need for installation format