Biasi Riva Compact Combination 28KW Non Condensing Boiler
Technical Data
If You Are Considering Purchasing a Flue Kit Please Take Into Consideration:
Ø60 / 100mm is the flue diameter for horizontally exiting kits and Ø80 / 125mm is the flue diameter for vertically exiting kits
 |
| 
|
| | Small in size, big on performance • Automatic boiler bypass
• Anti-scale control system
• Frost protection system
• Electronic ignition system
• Ultra-compact dimensions
• 24 hour electronic programmer
• No compartment ventilation required
• LPG Kits available | |
This is a non condensing boiler please go to our shop for condensing boilers
Please not: All boilers need to be fitted by registered CORGI fitters and will have to be approved by them. Please do not purchase any items without consulting your plumber before. | |
Go with the flow ...
Horizontal Flue Kit & Digital Time Clock is included In price
Central Hearing
Heat Input 31.1kW (106,107Btu's)
Minimum Heat Output 11kW (37,530Btu’s)
Temperature Seating Range ºC 38/85
Expansion Vessel Capacity 6 Litres
Maximum Working Pressure 3.00 bar
System Cold Fill Pressure 1.3 bar
Normal Operating Pressure Range 1.3 to 2.7bar
Available Pump Pressure (at 1000 litres/hr) 0.3 bar m.w.c 3.0
Domestic Hot Water
Heat Input 31.1kW (106,107Btu's)
Temperature Seating Range ºC 35/55
Normal Working Pressure Range 0.3 to 5.0 bar
Minimum Working Pressure Range 0.3 bar
Maximum Pressure 10.00 Bar
Minimum Flow Rate 2.5 l/min
Other Data
Voltage/Frequency 230/50 V/Hz
Power 150W
Height 703mm
Width 400mm
Depth 325mm
Weight 39kg
C.H. Inlet & Outlet Connections 22mm / ¾"
Gas Inlet Connection 22mm / ¾“
D.H.W Inlet & Outlet Connection 15mm / ½"
Standard Flue Pipe ? (Nominal Length 750mm) 60/100mm
Maximum Horizontal Length of Flue Pipe 2.0m
Minimum Horizontal Length of Flue Pipe 0.5m
Efficiency
SEDBUK Rating D
Building Regulations – Part L compliant
Clearance Requirements
Top & Bottom 200mm
Left Hand Side 25mm
Right Hand Side 50mm
Minimum Front Clearance requirements in Operation 50mm
Minimum Front Clearance requirements for Servicing and Maintenance 600mm
Why choose a Biasi Combi Boiler?
Ideal for the larger home and supplying that extra Domestic Hot Water requirement.
So easy to install and maintain
- Ultra-compact design
- Elegant Italian styling
- Beautiful, gloss white casing
- Designed to be wall mounted thus saving you valuable space
- Hot water supplied at mains pressure
- Wide choice of flueing options including vertical and multi-directional, room-sealed balanced flues that expel flue gases to the outside via integral fan units
- Electronic ignition system
- Automatic boiler bypass
- Frost Protection System
- New, advanced 24 hour Electronic Programmer
- All Biasi combi boilers are manufactured to comply with all EU Safety Standards
- No tank or cylinder
- Minimal pipe work
- Substantial savings on materials
- Quick & easy installation
- Easy access to all main components
- Servicing time and bills greatly reduced
- Conversion Kits available for liquid petroleum gas users Pipe work to the boiler can be completed prior to the boiler installation with the aid of a pre pipe fixing jig. It is also possible to hide the pipe work behind the boiler through the use of a concealed pipe work jig. Both jigs are available as additional accessories.
Simple controls save you even more
All Riva Compact combi boilers have electronic ignition, without a pilot flame - saving on gas bills. They also come with a fitted 24 hour electronic programmer as standard so you can control your heating and hot water needs precisely according to the demands of your household.
What is a Combi boiler
A combi (combination) boiler heats water directly from the cold mains as you use it. There's no hot water cylinder, no water tank in the loft, and no pipes to worry about in Winter.
Combi boilers supply hot water at mains pressure, assuring you of a powerful shower without a seperate pump. Bathe when you like too - there's no need to wait for the water to heat up!
Important Instructions
Please note: All boilers need to be fitted by registered CORGI fitters and will have to be approved by them.
Please do not purchase any items without consulting your CORGI REG plumber before purchasing.
Once opened, a restocking charge would have to be charged due to the fact they are not resalable once opened. They will have to be re-tested, and re-sealed by the manufactures, hence the need of a restocking charge on all boilers.
We are not permitted to re-sell second hand boilers due to CORGI GAS SAFETY.
Please click on the Specification link below this is the manufactures brochure with all details you may need for installation format
Need help viewing this PDF document? Follow the link to our Help With PDFs Section
