Product Characteristics

• Individual pumps require a minimum head to operate automatically ( varies from pump to pump, usually 200-300mm vertical distance from water level in tank to handset), if this is not achieved a negative head kit may be required
• Pumps will empty both hot and cold tanks more quickly than a standard system, please keep this in mind when selecting size of pump. You may want to check the capacity of both water tanks and think about how long and often the shower will be used.
• Pump must be installed to all relevant IEE Wiring Regulations (BS 7671) and be protected with a Residual Current Device (RCD).
• Isolating switch should be of the pull cord type, if not it should be out of reach of person using bath/shower
• It is advisable to fit easily accessible isolating and non-return valves to both inlets (where not already supplied). This will ensure future maintenance is made easy and compliance with Water Regulations.