|
MX Flat Top Easy Plumb Tray 1000mm x 700mm x 205mm
Product Features
-
Superb Quality
-
Exquisite Styling
-
Strength and Durability
-
ABS Stone Resin
-
Manufactured to British Standard BS6340/5
-
Tough high gloss ABS acrylic capped surface finish
-
Easy to clean and maintain
-
205mm High
-
Comes With Panel/s and adjustable feet
Properties of MX Flat Top Easy Plumb Tray
The MX Easy-Plumb shower tray is designed for raised installation and is supplied with feet and panels to give easy access for plumbing. The supporting feet attach to the integral baseboard on the tray. The board serves to distribute the load on the tray evenly so that tensile stresses are avoided. The feet are adjustable to cater for tray height, waste clearance and adjustment after settlement. The lightweight panels and fixings conceal the underside, ensuring a perfect finish. These trays are easily converted to a ‘upstand’ by using the MX VersatileSeal Strip.
Please cheque the technical drawing down the bottom of the page to see where the waste position is:
Technical Diagram
Product Specifications
|
Size mm |
Code |
Mat |
Waste Position |
Waste Size |
A |
B |
C |
D |
E |
F |
|
1000x700 |
5HR |
S/R |
W3 |
STD |
1000 |
700 |
205 |
60 |
185 |
185 |
Optional Extras Available
90mm High-Flow Waste
Suitable for any shower tray that has the British standard waste hole (92mm).
Specially designed to enable water to flow from the shower tray at a rate greater than 32 litres per minute. Complete with offset elbow to assist installation. Maintenance and cleaning is achieved through the quick release inner unit. Available in chrome finish. |
 |
|
Expendable Flexible Waste Pipe
Fully flexible to ease installation of the shower tray waste and solves most waste plumbing problems. It extends up to 1200mm in length. Designed to fit directly to the shower tray waste and the standard 1½” (38mm) waste pipe. |
 |
|
Versatile Seal Strip
The Versatile Seal Strip will instantly transform any standard shower tray to a tiling upstand option. The Versatile Seal Strip is an extruded self-adhesive UPVC tiling upstand that is fixed by hand to the shower tray prior to installation. This extruded strip comes complete with a mould resistant cushioned seal to ensure a snug fit which combined with its unique angled design helps ensure a watertight seal between the shower tray or bath and the wall. |
|
MX ABS Stone Resin Shower Trays
This type of tray is a recent development of the original stone resin concept. The difference being that a plastic outer shell of acrylic capped ABS is filled with the stone resin mix for the required strength and rigidity to eliminate unwanted movement. Due to its heat-retaining properties, the tough outer surface, which is resistant to impact and chemicals, is warm to the touch. Readily available in popular sizes, MX ABS stone resin shower trays can be installed as floor standing, on a plinth or on legs as an Easy-Plumb.
Features and Benefits
-
Strong and rigid construction
-
Manufacture to British standard BS6340/5
-
Tough high gloss ABS acrylic capped surface finish
-
Easy to clean and maintain
-
Low profile and standard options avalible
-
All instruction options avaliable
|
