Important notice

Although shower door and enclosure sizes are related to tray sizes it is important to note that most shower trays are tiled down to the rim, often over an ‘up-stand’. The finished installation space may be less than the nominal tray size. Shower Products such as Merlyn doors & enclosures are made to suit this remaining space.The adjacent guide may be helpful in taking measurements to determine the shower door or enclosure size required.Dimensions given in this publication are in millimetres, are approximate and may vary with adjustment. They are subject to change without notice. 

Cleaning: Clean after every use with warm soapy water and wipe dry with a soft cloth, never use a gritty or abrasive cleaner.

Please Note: All Merlyn Series 7 products and Series 5 hinge & saloon doors cannot be fitted on trays with an up-stand in the position where the door opens.

Product Information

• All products are manufactured in accordance with ISO 9002 and utilise toughened safety glass to EN12150-1.
• Aluminium sections are extruded to BS 1474 from alloys complying with BS 6463 and coated to BS 6464.
• Doors and enclosures have been tested in accordance with BS 6340 part 3 are suitable for use with most modern power showers.
• All doors featured adjustable wall profiles to compensate for out-of-true walls and have micro adjustment features for fine tuning to obtain a perfect firm and operating action.
• Returns incur a strictly administered 30% restocking charge. Opened cartons will not be accepted.
• All products are supplied complete with full installation instructions and the necessary fixings.
• Parts subject to wear are not covered by the lifetime guarantee.
• Only shower enclosures are covered by the lifetime guarantee
• Water retention is maintained in all products under normal showering conditions.  

Cleaning

• It is important to clean your Merlyn shower door after every use. Wipe down all the glass and metal parts with a soft cloth.
• Do not allow lime scale to build up in hard water areas.
• Ensure that any residual water on the glass is removed after every use.Clean the glass regularly using soapy water.
• A 50:50 solution of water and vinegar may help to remove water-marking. Ensure all vinegar residue is rinsed away with clean water.
• Do not use abrasive products on any surfaces.
• Install the enclosure in a well ventilated area.