Merlyn Series 7 Shower Enclosure Walk-In 1700 Bath Replacement

0 item(s) in a bag Total: £0.00- Checkout

Home > Showers > Shower Enclosures Shower Trays

Price

Retail Price:	£2,052.73
Your Savings:	£667.13
Your Price:	£1,385.60

Choose Options & Quantity


Hand		Left Right


Shower Tray Option		Chrome 1700mm Walk-in shower, main panel, tray with end panel (70281) Chrome 1700mm Walk-in shower, main panel, tray without end panel (70280) [+£-277.59] Chrome 1450mm Walk-in shower, main panel, tray with end panel (70291) Chrome 1450mm Walk-in shower, main panel, tray without end panel (70290) [+£-277.59]


Include Shower Waste		McAlpine WT on Plastic Shower Trap Top Access [+£8.94] CP on Plastic Shower Trap with Top Access [+£8.95]

Quantity

Description

Merlyn Series 7 Shower Enclosure Walk-In 1700 Bath Replacement

adjustmant min - max are above clear glass

Product Features

Life Time Guarantee
6mm Toughened safety glass
High level towel rail
Wide entrance space with large drying area
No moving parts
Adjustable wall profiles for out of true walls
Integrated, easy-clean waste system
Shown with optional Merlyn Sensa shower
Shown with standard height tray, 165mm, low level tray also available
Shown with optional Towel Warmer
Available with Merlyn M-tower
Available with optional Merlyn Mirror
Time & space
Elegant & distinctive

Fitting Instructions

We recommend that the shower head be positioned on the wall opposite the Main curved panel
With this type of enclosure design we recommend fitting on a tiled or other water repellent floor
Walk-in is handed, state left or right when ordering
Total Height of the unit to the top of the high level towel rail (inc. standard tray) is 2220mm

This shower can be used for the following spaces:

Offset corner (picture 1) where a side panel is recommended

Rectangular Recess (picture 4) where a side panel is not recommended

Product Specification

Standard Tray

Colour	Size	Panel	Order code LH	Order code RH
Chrome	1700	Walk-in shower, main panel, tray with end panel	70281L	70281R
Chrome	1700	Walk-in shower, main panel, tray without end panel	70280L	70280R

Low Level Tray

Colour	Size	Panel	Order code LH	Order code RH
Chrome	1700	Walk-in shower, main panel, tray with end panel	70282L	70282R
Chrome	1700	Walk-in shower, main panel, tray without end panel	70283L	70283R

Choice of Tray Height

Standard height 165mm with access panel (all plumbing above floor level, adjustable feet to compensate for uneven floors)
Low level tray 85mm

Notice

When a shower tray is fitted it is essential that it is level before any door or enclosure is fitted
Trays supplied with a waste fitting have a flow rate noted. This should exceed the delivery capability of the showering system
Waste traps should be cleaned every week to ensure continued, efficient draining
Chrome, fast flow waste trap with easy clean cartridge removable from top

M - Tower Options

Option 1

order code MT0250

Sliding Rail Tower with Body Jets

* Bright chrome finish

* 3 port solid brass valve and

thermostatic control knobs

* Sliding Rail

* Hand spray with 5 spray patterns

* Integrated water outlets

* Shower flex

* 3 Body jets

Option 2

order code MT0150

Fixed Head Tower with Body Jets

* Bright chrome finish

* 3 port solid brass valve and

thermostatic control knobs

* Fixed head with 5 spray patterns

* Fixed head arm

* 4 Body jets

Option 3

order code MT0200

Sliding Rail Tower

* Bright chrome finish

* 2 port solid brass valve and

thermostatic control knobs

* Sliding Rail

* Hand spray with 5 spray patterns

* Intergrated water outlets

* Shower flex

* Suitable for combi-boiler

depending on mains pressure

Stepping into the shower you enter a time and space all of your own

A Place of comfort, revitalisation, safety.

Merlyn can provide the ultimate enclosure for this perfect vision of luxurious showering.

The Series 5 & 3 Products families offer unparalleled quality and performance in a comprehensive range of space conscious, design co – ordination shower doors & enclosures

Important notice

Although shower door and enclosure sizes are related to tray sizes it is important to note that most shower trays are tiled down to the rim, often over an ‘up-stand’. The finished installation space may be less than the nominal tray size. Shower Products such as Merlyn doors & encosures are made to suite this remaining space. The adjacent guide may be helpful in taking measurements to determine the shower door or enclosure size required. Dimensions given in this publication are in millimetres, are approximate and may vary with adjustment. They are subject to change without notice.

Take the measurements after the tray is installed and the walls are tiled

Please note: That when a tray is fitted it is essential that the tray is level before any doors or enclosures are fitted.

Tray upstands: Ensure strong and secure joints between shower tray and walls, even in the event of floor settlement. Tiling must be finished over the recessed upstand as shown in the diagram below.

Cleaning: Clean after every use with warm soapy water and wipe dry with a soft cloth, never use a gritty or abrasive cleaner.

Please Note:All Merlyn Series 7 products and Series 5 hinge & saloon doors cannot be fitted on trays with an up-stand in the position where the door opens.

Product Information

All products are manufactured in accordance with ISO 9002 and utilise toughened safety glass to EN12150-1.
Aluminium sections are extruded to BS 1474 from alloys complying with BS 6463 and coated to BS 6464.
Doors and enclosures have been tested in accordance with BS 6340 part 3 are suitable for use with most modern power showers.
All doors featured adjustable wall profiles to compensate for out-of-true walls and have micro adjustment features for fine tuning to obtain a perfect fir and operating action.
Returns incur a strictly administered 30% restocking charge. Opened cartons will not be accepted.
All products are supplied complete with full installation instructions and the necessary fixings
Parts subject to wear are not covered by the lifetime guarantee.
Only shower enclosures are covered by the lifetime guarantee
Water retention is maintained in all products under normal showering conditions.

Cleaning

It is important to clean your Merlyn shower door after every use. Wipe down all the glass and metal parts with a soft cloth.
Do not allow lime scale to build up in hard water areas.
Ensure that any residual water on the glass is removed after every use.
Clean the glass regularly using soapy water.
A 50:50 solution of water and vinegar may help to remove water-marking. Ensure all vinegar residue is rinsed away with clean water.
Do not use abrasive products on any surfaces.
Install the enclosure in a well ventilated area.

Technical Information & Pricing PDF

Merlyn Products PDF brochure

Order Form

Installation Guide

DT Render shower tray technical Details

DT Render Product Guide 2004-2005

The 'Product & Technical Data' links on these pages are Adobe® Acrobat® PDF files. Clicking on a link will attempt to open the PDF in a separate Explorer window. As some of these technical documents are large, we recommend RIGHT-CLICKING on the link and choosing 'Save Target As' to download the file to your local hard drive before opening. The 'Boiler Product & Technical Data' links on these pages are Adobe® Acrobat® PDF files. Clicking on a link will attempt to open the PDF in a separate Explorer window. As some of these technical documents are large, we recommend RIGHT-CLICKING on the link and choosing 'Save Target As' to download the file to your local hard drive before opening.

ABS/Acrylic Capped Resin Shower Trays

ABS/Acrylic Capped Resin Shower Trays Features

Removable Protective Film Protects the shower tray predelivery, during installation and tiling. This leaves a clean finish when removed.
High quality 3mm Acrylic Capping The capping gives strength, colour and design making the shower tray compatable with the rest of the bathroom suite.
Easy Plumb Matching Side Panels Manufactured from the same ABS material, the side panels are easily fitted, giving the finishing touches to the installation.
Fan Pattern Design Design and style with the fan pattern gives a safe and practical finish to the shower tray. Ease of cleaning and maintenance at its best. Complete Stability D&T Renders years of experience with the use of resins and polymers ensures an unsurpassed material stability.
Easy Plumb have Adjustable Feet Bespoke fully adjustable legs and feet which allow for full adjustment at installation. This not only improves stability but reduces the actual installation time.

Standard Model

Our wide range of standard trays are manufactured to the highest specification available and are designed to be set onto the floor or a timber plinth depending on the waste and height requirements. It should be noted that the manufacturers fitting instructions must be followed to ensure the longevity of your shower tray.

Easy Plumb Model

With the most comprehensive range of Easy Plumb shower trays and sizes available, there is a model to suit the majority of applications. Included are the adjustable legs, to ensure ease of fitting, and the side panels to complete the installation.

Shower Tray Technical Details

All ABS capped shower trays are acrylic encapsulated resin bonded trays and Incorporate a fan pattern design for anti-slip.

ABS gives you:-

Superior finish
Depth of colour
Extended life period of your shower
Ease of maintenance
Strength and durability