Alternative MX Shower Trays
ABS Acrylic Capped Resin Shower Tray 1200mm X 760mm
No quibble guarantee.
Delivery within 3 - 14 working days.
Order can take a little longer (3 - 21 working days) if no stock available.
As we can not stock every size available email or phone before ordering if you are in need if the item ASAP.
ABS/Acrylic Capped Resin Shower Trays
ABS/Acrylic Capped Resin Shower Trays Features
Standard Model
Our wide range of standard trays are manufactured to the highest specification available and are designed to be set onto the floor or a timber plinth depending on the waste and height requirements.
It should be noted that the manufacturers fitting instructions must be followed to ensure the longevity of your shower tray.
Easy Plumb Model
 
With the most comprehensive range of Easy Plumb shower trays and sizes available, there is a model to suit the majority of applications. Included are the adjustable legs, to ensure ease of fitting, and the side panels to complete the installation.
Shower Tray Technical Details
All ABS capped shower trays are acrylic encapsulated resin bonded trays and Incorporate a fan pattern design for anti-slip.
ABS gives you
- Superior finish
- Depth of colour
- Extended life period of your shower
-
Ease of maintenance
-
Strength and durability
The adjacent guide may be helpful in taking measurements to determine the shower door or enclosure size required.
Dimensions given in this publication are in millimetres, are approximate and may vary with adjustment. They are subject to change without notice.
Take the measurements after the tray is installed and the walls are tiled
Please note: That when a tray is fitted it is essential that the tray is level before any doors or enclosures are fitted.
Tray up stands: Ensure strong and secure joints between shower tray and walls, even in the event of floor settlement. Tiling must be finished over the recessed upstand as shown in the diagram below.
Technical Diagram
Cleaning: Clean after every use with warm soapy water and wipe dry with a soft cloth, never use a gritty or abrasive cleaner.
Please Note: All Merlyn Series 7 products and Series 5 hinge & saloon doors cannot be fitted on trays with an up-stand in the position where the door opens.
Product Information
- All products are manufactured in accordance with ISO 9002 and utilise toughened safety glass to EN12150-1.
- Aluminium sections are extruded to BS 1474 from alloys complying with BS 6463 and coated to BS 6464.
- Doors and enclosures have been tested in accordance with BS 6340 part 3 are suitable for use with most modern power showers.
- All doors featured adjustable wall profiles to compensate for out-of-true walls and have micro adjustment features for fine tuning to obtain a perfect fir and operating action.
- Returns incur a strictly administered 30% restocking charge. Opened cartons will not be accepted.
- All products are supplied complete with full installation instructions and the necessary fixings
- Parts subject to wear are not covered by the lifetime guarantee.
- Only shower enclosures are covered by the lifetime guarantee
- Water retention is maintained in all products under normal showering conditions.
Cleaning
- It is important to clean your Merlyn shower door after every use. Wipe down all the glass and metal parts with a soft cloth.
- Do not allow lime scale to build up in hard water areas.
- Ensure that any residual water on the glass is removed after every use.
- Clean the glass regularly using soapy water.
- A 50:50 solution of water and vinegar may help to remove water-marking. Ensure all vinegar residue is rinsed away with clean water.
- Do not use abrasive products on any surfaces.
- Install the enclosure in a well ventilated area.
Technical Information & Pricing PDF
Merlyn Products PDF brochure
Order Form
Installation Guide
DT Render shower tray technical Details
DT Render Product Guide 2004-2005
The 'Product & Technical Data' links on these pages are Adobe® Acrobat® PDF files. Clicking on a link will attempt to open the PDF in a separate Explorer window. As some of these technical documents are large, we recommend RIGHT-CLICKING on the link and choosing 'Save Target As' to download the file to your local hard drive before opening. The 'Boiler Product & Technical Data' links on these pages are Adobe® Acrobat® PDF files. Clicking on a link will attempt to open the PDF in a separate Explorer window. As some of these technical documents are large, we recommend RIGHT-CLICKING on the link and choosing 'Save Target As' to download the file to your local hard drive before opening.
|
