Electric Only Stainless Steel Heated Towel Warmer
Midi Slim Flat
Picture above Shown in standard version
810mm High X 360mm Wide
Output Delta T 50k = 339.44 watts (1159 BTU's)
• do not corrode or flake
• are pressure tested with air to 10 bars under water
• have two easily accessible bleed valves
• are fitted with 1/2" BSP sockets
• long mounts can be supplied to give an additional 40mm clearance from the wall
• tapping centres: 330mm
• wall to front face of rad: 85mm
• wall to centre inlet / outlet: 70mm
Supplied with one Electric Element and filled with thermal transfer fluid.
When you order a rail and element together the correct sized element is supplied.
(same as oil filling)
Please note the elements are supplied with a T-Piece to the finish of the rail.
Another good product from www.tradeplumbing.co.uk
Model selection reckoner
To identify the model with the most suitable heat output for your bathroom (linear measurements in feet)
Step 1: Multiply room length x room width x room height = room volume (cu ft)
Step 2: Multiply room volume as calculated in Step 1 by 5. This figure gives a rule of thumb guide to the heat output (in BTU's) required for the bathroom. |