Product Information

• All products are manufactured in accordance with ISO 9002 and utilise toughened safety glass to EN12150-1.
• Aluminium sections are extruded to BS 1474 from alloys complying with BS 6463 and coated to BS 6464.
• Doors and enclosures have been tested in accordance with BS 6340 part 3 are suitable for use with most modern power showers.
• All doors featured adjustable wall profiles to compensate for out-of-true walls and have micro adjustment features for fine tuning to obtain a perfect fit and operating action.
• Returns incur a strictly administered 30% restocking charge. Opened cartons will not be accepted.
• All products are supplied complete with full installation instructions and the necessary fixings
• Parts subject to wear are not covered by the lifetime guarantee.
• Only shower enclosures are covered by the lifetime guarantee
• Water retention is maintained in all products under normal showering conditions.

Cleaning

• It is important to clean your Merlyn shower door after every use. Wipe down all the glass and metal parts with a soft cloth.
• Do not allow lime scale to build up in hard water areas.
• Ensure that any residual water on the glass is removed after every use.
• Clean the glass regularly using soapy water.
• A 50:50 solution of water and vinegar may help to remove water-marking. Ensure all vinegar residue is rinsed away with clean water.
• Do not use abrasive products on any surfaces.
• Install the enclosure in a well ventilated area