- UK Mainland Delivery: £8.95
- Dispatch Time: Dispatched within 3 working days
- Standard Delivery: Next Working Day
Need this item sooner or have special delivery arrangements?
Fill in our callback form and we will get in contact to help.
Fill in our callback form and we will get in contact to help.
Any requests to return an order must be made, in writing, within 7 days of receipt of goods.
To View our complete Return Policy Click on Return and Refunds
To View our complete Return Policy Click on Return and Refunds
Product Description
Bristan / Newteam Varispeed 50 Power Shower Pump
Product Characteristics & Benefits
This pump is ideal for use with any mixer shower from a gravity fed system.
- Gives a much higher flow rate to your current system, creating a more powerful shower.
- Ideal for pressure requirements up to 1.5 bar (50ft of working head)
- Comes complete with built-in pre-wired flow switches to reduce installation time.
- Variable speed control for flow and pressure adjustment.
- Boosts the power of a typical gravity fed shower by 12-20 times.
- Produces a flow of up to 13 litres per minute.
- High quality motor and ceramic/carbon seals ensure long life.
- Pump body is made from acetal plastic to resist limescale build-up.
- Comes complete with four push-fit flexible hoses to suit, and full installation guide.
- Continuous motor rating.
- Dimensions are 260mm (W) x 190 (H).
-
Please note this unit cannot be used with combination/pressurised or mains-fed systems.
-
Comes complete with a 2 year manufacturer's guarantee.
Product Features
- Individual pumps require a minimum head to operate automatically (varies from pump to pump, usually 200-300mm vertical distance from water level in tank to handset), if this is not achieved then a negative head kit may be required.
- This pump will empty both hot and cold tanks more quickly than a standard system, please keep this in mind when selecting the size of your pump. You may want to check the capacity of both water tanks and think about how long and often the shower will be used.
- This pump must be installed to all relevant IEE Wiring Regulations (BS 7671) and be protected with a Residual Current Device (RCD).
- Isolating switch should be of the pull-cord type, if not it should be out of reach of the person using bath/shower.
-
It is advisable to fit easily accessible isolating and non-return valves to both inlets (where not already supplied). This will ensure future maintenance is both made easy and in compliance with Water Regulations.
Please click the Technical tab for the Installation Guide.
Additional Information
| Manufacturer ID | HY PUMP50 V |
|---|---|
| Manufacturer | Bristan |
