Telford Tornado 3.0 Indirect Unvented Stainless Steel Cylinder
Delivery Estimate: 12-15 Working Days
SKU : T2SI150/3.0
Made to order
For faster shipment, please pay via BACS. This option is available at checkout.
The Telford Tornado 3.0 Indirect is an unvented stainless steel hot water cylinder with built-in thermal expansion, so no external expansion vessel is required. It has an internal coil and is designed for use with a gas or oil-fired boiler as the main heat source, on either a sealed system or an open-vented system. The inner cylinder is manufactured from Duplex stainless steel and is supplied with a factory-fitted 3 kW immersion heater for back-up heat. This listing covers the standard Tornado Indirect range in 125, 150, 170, 200, 250 and 300 litre sizes.
Each cylinder is supplied with a full unvented kit, including an acetal tundish and an inlet control group, together with a factory-fitted temperature and pressure relief valve set at 7 bar / 90°C. Fittings and coils are 316L stainless steel 22 mm compression. Telford states a lifetime manufacturing warranty on the inner container and two years on components (terms and conditions apply).
Key features
- Indirect unvented stainless steel cylinder with an internal coil for a gas or oil-fired boiler
- Built-in thermal expansion — no external expansion vessel required
- Duplex stainless steel inner cylinder
- 316L stainless steel 22 mm compression fittings and coils
- Mains-pressure hot water and high flow rates, as stated by Telford
- Factory-fitted 3 kW immersion heater for back-up heat
- Factory-fitted temperature and pressure relief valve set at 7 bar / 90°C
- Full unvented kit supplied, including acetal tundish and inlet control group
- Fully insulated to minimise heat loss
- Available in 125–300 litre capacities
- Lifetime manufacturing warranty on the inner container (2 years on components), as stated by Telford
Technical specification
Figures below are taken from Telford’s official Tornado Indirect technical data sheet. The 300 litre official product code is listed here as T2SI300/3.0; the data sheet prints that code as T2SI300/.0.
| Specification | 125 L | 150 L | 170 L | 200 L | 250 L | 300 L |
|---|---|---|---|---|---|---|
| Official product code | T2SI125/3.0 | T2SI150/3.0 | T2SI170/3.0 | T2SI200/3.0 | T2SI250/3.0 | T2SI300/3.0 |
| Nominal capacity | 125 L | 150 L | 170 L | 200 L | 250 L | 300 L |
| Actual capacity | 121 L | 149 L | 168 L | 194 L | 246 L | 294 L |
| Height | 1025 mm | 1260 mm | 1325 mm | 1550 mm | 1800 mm | 2050 mm |
| Diameter | 580 mm | 580 mm | 580 mm | 580 mm | 580 mm | 580 mm |
| Connection height A | 171 mm | 171 mm | 171 mm | 171 mm | 171 mm | 171 mm |
| Connection height B | 201 mm | 201 mm | 201 mm | 201 mm | 201 mm | 201 mm |
| Connection height C | 401 mm | 401 mm | 451 mm | 451 mm | 571 mm | 571 mm |
| Connection height D | 501 mm | 496 mm | 601 mm | 601 mm | 821 mm | 821 mm |
| Connection height E | 651 mm | 858 mm | 813 mm | 1040 mm | 1268 mm | 1460 mm |
| Empty weight | 35 kg | 38 kg | 42 kg | 46 kg | 55 kg | 61 kg |
| Full weight | 156 kg | 187 kg | 210 kg | 240 kg | 301 kg | 355 kg |
| Standing heat loss | 1.21 kWh/24h | 1.36 kWh/24h | 1.40 kWh/24h | 1.64 kWh/24h | 1.71 kWh/24h | 1.82 kWh/24h |
| Reheat time (10°C to 60°C) | 36 min | 37 min | 36 min | 33 min | 35 min | 40 min |
| Standing loss | 68 W | 77 W | 82 W | 77 W | 83 W | 92 W |
| Energy efficiency class | C | C | C | C | C | C |
| Operating pressure | 3 bar | 3 bar | 3 bar | 3 bar | 3 bar | 3 bar |
| Immersion heater | 3 kW at 240 V | 3 kW at 240 V | 3 kW at 240 V | 3 kW at 240 V | 3 kW at 240 V | 3 kW at 240 V |
| Max incoming supply pressure | 12 bar | 12 bar | 12 bar | 12 bar | 12 bar | 12 bar |
