Gledhill Stainless Lite Plus Flexible Buffer Store Vented Cylinder 300 Litre

Technical Information

• ErP Rating: C
• Heat Loss: 86Watts
• Capacity: 287 L
• Height: 1990mm
• Diameter: 550mm
• Weight (empty): 39 kg
• Weight (full): 326 kg
• Material: Stainless Steel
• Open vented duplex stainless steel cylinder
• Provides connections for multiple inputs
• Suitable for use with air source or ground source heat pumps, wood burning stoves or open vented boilers
• Designed to directly supply the heating circuit
• Works up to 3.5 bar pressure
• 25 year's guarantee from manufacturer

Vented Hot Water Cylinder has been Specifically Designed to Fulfil your Heating Requirements

This Gledhill Buffer Store Cylinder is a hot water cylinder that is meant to increase the overall volume of the heating distribution system. It reduces the cycling of the heat pump. This vented hot water cylinder has been specifically designed to fulfil your heating requirements and is known for its high efficiency levels and good performance. These buffer vessels are a duplex stainless steel tank that contain are designed to absorb any extra heat generated by the heat pump in low load conditions.

If the building cannot absorb the extra heat generated the return temperature to the heat pump will increase and will potentially cause the heat pump to turn off. If the temperature drops in the water returning to the heating appliance, then it will turn itself back on. If this cycling occurs at a greater frequency than the minimum run time for the appliance, this is classed as short cycling. The aim of a buffer vessel is to remove the possibility of any short cycling of the heating appliance.

These buffer vessels are designed to work at up to 3.5 bar pressure for primary water only. They should not be used for potable domestic hot water as are not approved for this purpose. This hot water cylinder is suitable for use with gas and oil boilers to maximise efficiency. Every model is designed to deliver high performance and transfer the adequate amount of heat to stored water.

Key Features of Gledhill Stainless Lite Plus Flexible Buffer Store Vented Cylinder 300 Litre

• Capacity: The Gledhill Stainless Lite Plus Flexible Buffer Store Vented Cylinder has a large capacity of 300 liters, making it suitable for storing and supplying a significant amount of hot water or buffer storage for heating systems.
• Buffer Storage: Buffer stores are commonly used in heating systems to store excess heat generated by boilers, heat pumps, or renewable energy sources. This stored heat can be used later when needed to improve system efficiency.
• Vented Design: A vented cylinder is connected to an open or vented heating system. It relies on gravity to circulate water. Vented cylinders are typically more straightforward in design compared to unvented cylinders.
• Stainless Steel Construction: Stainless steel construction is often used in buffer stores for its durability and resistance to corrosion, ensuring a long lifespan and maintaining water quality.
• Insulation: High-quality insulation is important to minimize heat loss from the stored water or buffer fluid, increasing energy efficiency.
• Expansion Space: Buffer stores typically have extra space to accommodate the expansion of water or heating fluid when it is heated.
• Tappings and Connections: The cylinder should have the appropriate tappings and connections to integrate smoothly with your heating system, including inlet and outlet connections.
• Safety Features: Safety features like a pressure relief valve and temperature and pressure relief valve (TPR valve) are essential to ensure safe operation within specified pressure and temperature limits.
• Energy Efficiency: Buffer stores can improve the overall energy efficiency of a heating system by storing excess heat and releasing it when needed, reducing the workload on the primary heat source.
• Multiple Uses: Depending on the system setup, buffer stores can serve multiple purposes, such as providing domestic hot water, space heating, or supporting renewable energy systems.
• Easy Installation: Manufacturers often design buffer stores with installation in mind, providing multiple entry points and connections to simplify the installation process.
• Compliance: Ensure that the cylinder complies with relevant safety and building regulations in your region. Compliance is crucial for safety and legal reasons.
• Warranty: Check if the product comes with a warranty to protect against manufacturing defects.

Benefits of Gledhill Stainless Lite Plus Flexible Buffer Store Vented Cylinder 300 Litre:

The Gledhill Stainless Lite Plus Flexible Buffer Store Vented Cylinder with a capacity of 300 liters offers several benefits that can enhance the efficiency and performance of heating systems. While the specific benefits may vary depending on the model and design, here are some potential advantages associated with this type of buffer store:

• Large Capacity: With a 300-liter capacity, this buffer store can store a significant amount of hot water or heating fluid, making it suitable for both residential and commercial applications.
• Buffering Heat: Buffer stores act as a thermal reservoir, storing excess heat generated by boilers, heat pumps, or renewable energy sources. This stored heat can be released when needed to maintain consistent and efficient heating system operation.
• Energy Efficiency: Buffer stores improve the overall energy efficiency of a heating system by allowing it to operate at its most efficient level. They reduce the number of on/off cycles for heating equipment, which can lead to energy savings.
• Reduced Cycling: By reducing the frequency of the boiler or heat pump cycling on and off, buffer stores help prolong the lifespan of heating equipment and reduce maintenance requirements.
• Improved Comfort: Buffer stores help maintain a consistent supply of hot water or heating fluid, ensuring a steady and comfortable indoor temperature.
• Domestic Hot Water Supply: Depending on the system setup, a buffer store can also serve as a source of domestic hot water, providing ample hot water for showers, faucets, and appliances.
• Flexibility: The "Flexible" designation suggests adaptability to various heating systems and configurations, allowing for versatility in system design.
• Vented Design: Vented cylinders are typically simpler to install and maintain compared to unvented systems, which may require additional safety measures.
• Stainless Steel Construction: Stainless steel construction ensures durability and corrosion resistance, resulting in a long-lasting and low-maintenance buffer store.
• Safety Features: Buffer stores, like other hot water cylinders, come with safety features such as pressure relief valves and temperature and pressure relief valves (TPR valves) to prevent overpressure and overheating.
• Compatible with Renewable Energy: Buffer stores can integrate seamlessly with renewable energy sources like solar thermal systems, enhancing the utilization of renewable heat.
• Minimal Heat Loss: High-quality insulation minimizes heat loss from the stored water or heating fluid, contributing to energy efficiency.

Conclusion:

The Gledhill Stainless Lite Plus Flexible Buffer Store Vented Cylinder with a 300-liter capacity offers several significant advantages for heating systems. Its features and benefits make it a valuable addition to various residential and commercial heating setups. In conclusion. This buffer store efficiently manages excess heat produced by heating sources, such as boilers, heat pumps, or renewables, optimizing system performance and energy efficiency. By reducing the number of cycling events for heating equipment, it contributes to energy savings and lowers operating costs over time. The buffer store ensures a steady and comfortable indoor temperature, enhancing overall comfort in residential and commercial spaces. With a 300-liter capacity, it's well-suited for applications with substantial hot water or heating fluid requirements. Depending on system configuration, it can serve as a source of domestic hot water, providing ample hot water for various household or commercial needs. The "Flexible" designation suggests adaptability to various heating systems and configurations, offering flexibility in system design. Constructed from stainless steel, it boasts durability and corrosion resistance, leading to a long lifespan with minimal maintenance. High-quality insulation minimizes heat loss, contributing to energy efficiency and cost savings.