Gledhill 120 Litre Stainless Lite Plus Indirect Open Vented Cylinder

Technical Information

• Cylinder ErP Rating: B
• Cylinder Capacity: 120 Litres
• Cylinder Height: 931mm
• Cylinder Overall Diameter: 550mm
• Guarantee Length: 25 years
• Specifically designed for use with gas or oil boilers
• High efficiency corrugated coil maximises heat transfer from the solar input
• 3kW incoloy immersion heater for emergency back-up
• Standard and slimline models available
• Open vented cylinder is not supplied with pressure relief valve as shown in image

Upgrade your water heating system with Gledhill 120 Litre Stainless Lite Plus Indirect Open Vented Cylinder

Gledhill 120 Litre Stainless Lite Plus Indirect Open Vented Cylinder are ideal for providing heating and hot water simultaneously, which is why they make a popular chice for families. These open vented hot water system are designed for use with gas or oil boilders. Their corrugated coil provides faster reheat times compared to plain coil and high efficiency for maximizes heat transfer to the cylinder water.They use 3kW incoloy immersion heater for emergency back-up. They are supplied with90° elbow, flexihose and drain valve.Every model is design to dedicated high performance and transfer the maximum amount of heat to stored water.

Key Features of Gledhill 120 Litre Stainless Lite Plus Indirect Open Vented Cylinder

• Open vented duplex stainless steel cylinder in direct or indirect models
• Buffer stores increase the overall volume of the heating distribution system, and reduce the cycling of the heat pump
• Designed for use with either air source or ground source heat pumps
• Indirect models for use with gas or oil boilers, utilise a high efficiency corrugated coil to maximise heat transfer
• Lightest cylinder on the market

Additional Information

Buffer vessels are simply a duplex stainless steel tank that contains a volume of water, increasing the overall volume of the heating distribution system. This extra volume of water is designed to absorb any extra heat generated by the heat pump in low load conditions.

If the building cannot absorb the extra heat generated the return temperature to the heat pump will increase and will potentially cause the heat pump to turn off. If the temperature drops in the water returning to the heating appliance, then it will turn itself back on. If this cycling occurs at a greater frequency than the minimum run time for the appliance, this is classed as short cycling. The aim of a buffer vessel is to remove the possibility of any short cycling of the heating appliance.

These buffer vessels are designed to work at up to 3.5 bar pressure for primary water only. They should not be used for potable domestic hot water and are not approved for this purpose.

Benefits of Gledhill 120 Litre Stainless Lite Plus Indirect Open Vented Cylinder:

The Gledhill 120 Litre Stainless Lite Plus Indirect Open Vented Cylinder offers several benefits due to its features and design. Here are some potential advantages of this specific cylinder model:

• Stainless Steel Construction: The use of stainless steel enhances the cylinder's durability and corrosion resistance, leading to a longer lifespan and reduced maintenance needs.
• Indirect Heating: Indirect cylinders are heated by an external heat source, such as a boiler or heat pump. This design prevents the heating element from coming into direct contact with water, reducing the risk of scale buildup and improving longevity.
• Open Vented Design: The open vented design is relatively simple and works well with traditional heating systems. It utilizes a cold water tank in the loft to supply the cylinder, and the cylinder is vented to the atmosphere to relieve excess pressure.
• 120-Litre Capacity: With a capacity of 120 litres, the cylinder can store a reasonable amount of hot water, making it suitable for smaller households or properties with moderate hot water demands.
• Compatibility with Various Heat Sources: The indirect heating method allows the cylinder to work with various heat sources, such as gas or oil boilers, solar thermal systems, or heat pumps.
• High Heat Transfer: Stainless steel's heat conductivity ensures efficient heat transfer, resulting in quicker recovery times after hot water is used.
• Reliability: Stainless steel cylinders are known for their reliability and resistance to corrosion, reducing the risk of leaks and maintenance issues.
• Low Heat Loss: The cylinder's likely built-in insulation helps to minimize heat loss, contributing to energy efficiency and potentially lowering energy bills.
• Safety Features: The cylinder is likely equipped with safety features such as temperature and pressure relief valves, ensuring safe operation and preventing overpressure.
• Compact Design: The cylinder's size is designed to be relatively compact, saving space compared to larger cylinder models.
• Reduced Limescale Buildup: Indirect heating reduces the risk of limescale buildup on the heating element, contributing to longer-term efficiency.
• Quiet Operation: The design of the cylinder and its heating method typically result in quiet operation.
• Professional Installation: As with any hot water cylinder, professional installation is crucial for safety and optimal performance. Proper installation ensures that the cylinder functions as intended.
• Customization Options: Depending on the manufacturer, there might be customization options available, allowing you to tailor the cylinder to your specific needs.
• Compatibility with Mixing Valves: The cylinder can be paired with thermostatic mixing valves to ensure safe and comfortable water temperatures.

Conclusion:

In conclusion, Gledhill 120 Litre Stainless Lite Plus Indirect Open Vented Cylinder, exemplified by the Gledhill 120 Litre Stainless Lite Plus Indirect Open Vented Cylinder, are a smart investment for those looking to reduce energy costs and embrace eco-friendly heating solutions. With their off-peak tariff optimization and environmentally conscious features, these cylinders offer both economic benefits and a positive impact on the environment. However, it is essential to consider the storage capacity and the need to purchase immersion heaters separately.

By choosing the Gledhill 120 Litre Stainless Lite Plus Indirect Open Vented Cylinder, you can enjoy the perfect balance of performance, efficiency, and environmental responsibility, ensuring a constant supply of hot water while keeping your energy bills in check. Make an informed decision and take a step towards a greener and more cost-effective water heating solution for your home. Upgrade your water heating system with the Gledhill 120 Litre Stainless Lite Plus Indirect Open Vented Cylinder and experience the benefits of its innovation and excellence.