Gledhill Stainless Lite Plus Open Vented Heat Pump Cylinder 300 Litre

Technical Information

• Brand: Gledhill
• Cylinder ErP Rating: C
• Cylinder Capacity: 300 Litres
• Length: 760mm
• warrenty Length: 25 years
• Re-heat time of 25 minutes
• Low standing heat loss
• 100% recyclable

Introducing the Gledhill Stainless Lite Plus Open Vented Heat Pump Cylinder 300 Litre

Gledhill have produced an unvented stainless steel unit specifically for heat pump applications providing mains pressure domestic hot water. Utilising the well established Gledhill StainlessLite Plus unvented hot water cylinder, this product has been developed to maximise the lower temperatures available from the heat pump. The heat exchanger is a totally new design. It consists of a multi-pass corrugated stainless steel tube in parallel to reduce the pressure loss whilst maximising the heat exchange. Many medium to large heat pumps need heat exchangers in the store that will cope with the higher flow rates associated with primary temperatures that are typically 50 or 60 degrees celsius. All the usual features of the Gledhill StainlessLite Plus are maintained together with all the necessary controls and expansion devices included. Due to the fact that many heat pumps will not raise the stored water temperature to 60 degrees celsius, which is necessary to prevent the growth of legionella, the StainlessLite Plus HP model is supplied with an immersion heater tapping and a thermostat pocket.

It is recommended that a thermostat is fitted which brings the immersion heater on at a temperature just below the heat pump maximum and switches off at 60 or 65 degrees celsius. In this way the use of direct electricity is minimised and most of the water heating is achieved through the heat pump.

Key Features of Gledhill Stainless Lite Plus Open Vented Heat Pump Cylinder 300 Litre

• Gledhill SL Plus HP 300HP3SQM EE OV is manufactured with the finest material and these cylinders & have strong environmental & credentials.
• Because many heat pumps will not raise the stored water temperature to 60 degrees Celsius, which is required to prevent legionella growth.
• The StainlessLite Plus HP model has an immersion heater tapping and a thermostat pocket.
• Designed for use with either air source or ground source heat pumps.
• High efficiency corrugated coil maximises heat transmission to the water cylinder.
• 3kW incoloy immersion heater for emergency back-up.
• 90° elbow and drain valve provided as standard

Benefits of Gledhill Stainless Lite Plus Open Vented Heat Pump Cylinder 300 Litre

• Compatibility with Heat Pumps: The Gledhill Stainless Lite Plus Open Vented Heat Pump Cylinder is likely designed specifically for use with heat pump systems. This ensures compatibility and optimized performance when integrated with a heat pump.
• Energy Efficiency: Heat pump cylinders are known for their energy efficiency. Heat pumps transfer heat from the surrounding environment to heat the water, making them more energy-efficient than traditional heating methods.
• Reduced Energy Costs: The energy efficiency of heat pump cylinders can result in lower energy consumption, translating to reduced heating costs over time.
• Large Capacity: A 300-litre capacity is suitable for properties with moderate to high hot water demand. This is beneficial for larger households or situations where a significant amount of hot water is required.
• Stainless Steel Construction: If the cylinder is constructed with stainless steel, it can offer benefits such as corrosion resistance and durability, contributing to a longer lifespan for the unit.
• Open Vented Design: Open vented cylinders are designed to work with an open vented heating system, providing a reliable and straightforward setup for certain types of installations.
• Quick Reheating: Heat pump cylinders often have the capability to reheat water quickly, ensuring a continuous and readily available supply of hot water, even during peak demand periods.
• Environmentally Friendly: Heat pump systems are considered more environmentally friendly compared to traditional heating methods, as they utilize renewable energy sources and produce fewer carbon emissions.
• Quiet Operation: Heat pumps are generally known for their quiet operation, contributing to a more comfortable living environment.
• Smart Controls Integration: Some modern heat pump cylinders may come with smart controls that allow for better management of water temperature and heating schedules, enhancing user convenience and control.

Conclusion:

The Gledhill Stainless Lite Plus Open Vented Heat Pump Cylinder is likely designed specifically to work seamlessly with heat pump systems, ensuring efficient operation and compatibility. Open vented heat pump cylinders are known for their energy efficiency, leveraging heat pump technology to transfer heat from the environment to the water, resulting in reduced energy consumption and lower heating costs. With a 300-litre capacity, the cylinder is suitable for properties with moderate to high hot water demand, making it appropriate for larger households or situations with substantial hot water requirements. If the cylinder is constructed with stainless steel, it may offer benefits such as corrosion resistance and durability, contributing to an extended lifespan for the unit. Heat pump cylinders often have the capability to reheat water quickly, ensuring a continuous and readily available supply of hot water, even during peak demand periods. The open vented design is suitable for open vented heating systems, providing a reliable and straightforward setup for specific types of installations. Heat pump systems are generally considered more environmentally friendly, utilizing renewable energy sources and producing fewer carbon emissions compared to traditional heating methods. Modern heat pump cylinders may incorporate smart controls, allowing for better management of water temperature and heating schedules, enhancing user convenience and control.