Gledhill Torrent Stainless Sealed Primary Solar Cylinder 210 Litre

Technical Information

• ErP Rating: B
• Heat Loss: 62 Watts
• Capacity: 210 L
• Unit height: 1494mm
• Unit Diameter: 550mm
• Dedicated solar volume: 84 L
• Max. solar collector area: 2.91 m2
• Solar heat exch. surface area: 1.27m2
• Max. hot water flow rate: 26.5 L/Min
• Maximum dwelling type: Bath - 1, Bed: 2-3, Shower room: 1
• Guarantee: 5 years

This Cylinder Provides High Performance

This Torrent Stainless SP SOL has been designed to enable the homeowner to utilise available energy from solar, a wood burning or solid fuel boiler as a heat source. The Torrent Stainless SP SOL then reverts to the energy provided by a conventional boiler once the energy from the alternative energy sources has been used. The Torrent Stainless SP SOL provides high-performance mains pressure hot water via a highly efficient plate heat exchanger. The central heating circuit is normally supplied directly from the boiler although an auxiliary heating circuit can be connected from the store in which case the solid fuel source will provide energy to the auxiliary heating circuit. Obviously, the energy output that can be provided by the auxiliary heating circuit will be limited to the energy input from the solid fuel appliance.

This sealed primary (SP) model permits the use of a smaller feed and expansion tank because the main central heating circuit does not need to be catered for. This can make positioning the F&E tank more straightforward. An immersion element is provided, and it is normally envisaged that this will be used as an emergency electric back-up for hot water and to provide emergency energy to the auxiliary heating circuit. However, if a low carbon or renewable electricity source is available then this could be connected to the immersion element to provide heat input to the thermal store, decreasing the use of the fossil fuel boiler and hence reducing running costs.

Please Note:

• Additional height for feed and expansion tank will need to be allowed if it is to be sited in the same cupboard
• Vent pipes shown through the side of the feed and expansion tank may not be suitable for all systems. Installers must check suitability
• The Torrent Stainless SP Sol can be installed as a standard ‘S’ plan or ‘Y’ plan. The benefit of this is more flexibility on the location of the feed and expansion tank. However, when installed this way the central heating output will not gain heat from the solar thermal input to the thermal store
• The feed and expansion tank must be sized to take the water expansion of the whole system (ie. solid fuel boiler, cylinder, open flue boiler and auxiliary heating)
• The feed and expansion tank is not supplied as standard with the unit

Key Features of Gledhill Torrent Stainless Sealed Primary Solar Cylinder 210 Litre

• Suitable for use with gas and oil boilers
• Immersion Heater
• Solar Thermal
• Corrugated Supercoil
• Specifically designed for use with solar thermal panels
• Sealed primary boiler connections as standard
• 3kW immersion heater for emergency back-up
• Utilises solid fuel connections
• Provides mains pressure hot water
• Where there is no solar input, the coils can be connected to maximise heat input, reducing reheat time

Benefits of Gledhill Torrent Stainless Sealed Primary Solar Cylinder 210 Litre

The Gledhill Torrent Stainless Sealed Primary Solar Cylinder, like other solar water heating systems, is designed to harness solar energy to provide hot water for various applications in a residential or commercial setting. While I don't have specific information about this particular product, I can highlight some of the potential benefits associated with solar thermal systems like this one:

• Energy Savings: Solar water heaters can significantly reduce your energy bills since they rely on sunlight to heat water. This reduces the need for conventional heating methods, such as electricity or gas, leading to cost savings over time.
• Environmentally Friendly: Solar thermal systems are environmentally friendly as they use clean and renewable energy from the sun. This reduces carbon emissions and your overall environmental footprint.
• Reduced Dependence on Fossil Fuels: By using solar energy for water heating, you reduce your reliance on fossil fuels, contributing to energy independence and reducing the impact of energy price fluctuations.
• Low Operating Costs: Solar water heaters have relatively low operating and maintenance costs compared to other water heating systems. They typically have fewer moving parts, which means less wear and tear.
• Long-Term Investment: Solar thermal systems are considered long-term investments, as they have a longer lifespan compared to many other water heating systems. Properly maintained, they can last for 20 years or more.
• Government Incentives: Depending on your location, you may be eligible for government incentives, tax credits, or rebates for installing solar water heating systems. These incentives can further reduce the overall cost of the system.
• Increased Property Value: Installing a solar water heating system can increase the value of your property, as it is seen as an eco-friendly and energy-efficient feature.
• Reliable Hot Water Supply: Solar water heaters can provide a reliable supply of hot water, especially in sunny regions, helping to meet your daily hot water needs.
• Versatility: Solar thermal systems like the Gledhill Torrent can be integrated with existing heating systems or used as a standalone system, providing flexibility in their application.
• Low Maintenance: These systems typically require minimal maintenance, with periodic checks and maintenance tasks to ensure optimal performance.

Conclusion:

The Gledhill Torrent Stainless Sealed Primary Cylinder with a 210-liter capacity is a practical and reliable choice for hot water storage in domestic heating systems, especially in areas with inconsistent water pressure. Its key features and benefits, including a gravity-fed hot water supply, ample hot water capacity, stainless steel construction, energy efficiency, versatility, quality assurance, ease of maintenance, safety features, and compatibility with various heating systems, make it a well-rounded solution for homeowners.

This cylinder provides a consistent and reliable source of hot water for households with moderate to high hot water demands. Its compatibility with different heating methods and ease of maintenance ensure long-term efficiency and performance. Additionally, the cost-effectiveness of Sealed Primary cylinders makes them an economical choice for homeowners.