Reina Arlec Aluminium White Horizontal Designer Radiator Electric Only Extra Lightweight Dry Running

If you are searching for best designer radiators then Reina Arlec is the one you are looking for. The Arlec is a stylish and Slimline Contemporary radiator that is produced using high-quality Aluminium. This modern radiator is alluring, lightweight and proficient all in the meantime, ideal for any room in the home.The Reina Arlec is a new technology highlighting different warming modes, digital display, complex control through a remote, and incredible warming abilities.In addition, Arlec Electric Aluminium Radiator can be either floor standing or wall mounted with a 2-years manufacturers guarantee.

Key Features:

• Slimline - 54mm deep
• Offered in the sizes of 565mm x five width options
• Comes in a White finish.
• Multiple modes - Frost Protection, Economy, Comfort
• Fuel Source Option - Electric
• Plug Fitted
• Manufactured from Aluminium resulting in lightweight and silent operation.
• Available in 5 sizes, 700watt / 900watt / 1250watt / 1500watt / 1800watt.
• Slimline only 54mm deep. Competition much deeper. Very sleek design
• Digital timer display in blue. Goes out after 6o seconds so doesn’t disturb the user.
• 7 day, 24 hour built in timer with frost stat (frost protection).
• Multiple Modes of operation, Frost, Economy, Comfort operated from on board display or remote control.
• Display automatically locks after 30 seconds for tamperproof operation. To unlock press and hold – button on the heater or remote for 3 seconds.
• Thermostat is fitted above the controller and runs the complete width of the heater, resulting in even distribution of the heat to all panels.
• Mica board inside which houses the heating element. This give even heat, lightweight and silent operation. No pinging/tapping as the heater gets hot or cools.
• Wall mounted or floor standing as standard, brackets and feet provided along with screws and remote control.
• Excellent and sturdy engineered, slotted panels for various width sizes are locked together and held in place by mounting plates and 4 screws per section underneath the heater.
• Plug supplied and fitted.
• Heater comes with a 2 year warranty as standard.
• Electrical wholesalers like this product a lot because of its size and attractive look. 

In order to calculate the average operating cost for any electrical appliance you can use the following formula:

watts/1000 = kW x hours of operation = kW x kWh rate = cost

Watts can usually be found on the appliance nameplate.

Example: How much does it cost to operate my electric heater? An electric heater wattage is usually given on the unit itself, or with the literature that comes with it. A simple example is 1000 watts. To use this heater for 1 hour would cost based on UK Midlands British Gas standard tariff of 12.6p (September 2016) would be:-

1000 watts = 1kW x1 hour of operation = 1 kWh x 12.6p = £0.126p

This can then be calculated by hours used per day and by how many day although dependent on individual usage and of course the type of building it is being used in? Is it double glazed, insulated, type of floor and roof etc. If we take are Arlec and use this calculation it will cost the following per hour which I have rounded up to give a true refection

700 watt 0.7 x 12.6p = £0.09p per hour

900 watt 0.9 x 12.6p = £0.11p per hour

1250 watt 1.25 x 12.6p = £0.16p per hour

1500 watt 1.5 x 12.6p = £0.19p per hour

1800 watt. 1.8 x 12.6p = £0.23p per hour

The running costs of our towel rail Thermostatic and standard elements are as follows using the same formula –

Thermostatic

300 watt 0.3 x 12.6p = £0.04p per hour

600 watt 0.6 x 12.6p = £0.08p per hour

900 watt 0.9 x 12.6p = £0.11p per hour

Standard Heating Element

150 watt 0.15 x 12.6p = £0.02p per hour

250 watt 0.25 x 12.6p = £0.03p per hour

400 watt 0.4 x 12.6p = £0.05p per hour

600 watt 0.6 x 12.6p = £0.08 per hour

900 watt 0.9 x 12.6p = £0.11p per hour

Here at TradePlumbing.co.uk we have voluntarily extended our returns period to 90 days, as we understand that sometimes there may be the odd item left over from a project or you may have an unexpected delay to a project meaning that you need the added peace of mind when ordering products in case a return is necessary.

We truly believe in being able to offer customers a flexible service and this extended period allows us to go that little extra to help you when in need, as long as goods are returned in the same condition as received we are happy to help.

To return any time initially please email your request to our Customer Support team at customerservice@tradeplumbing.co.uk along with your TP - Order Reference, please allow at least 1 working day for response and we will take it from there.

To View our complete Return Policy Click on Return and Refunds